Source1[Red rod image]: Select Red rod image
created by 1GKDirec
p1[1 Segment Number](mode): Type of initial segment number
for segmentation
[1 Segment Number]=0 Fixed Initial Value
-> use a value of P10 for every parts.
[1 Segment Number]=1 Adaptive Initial Value
-> select P10-1, P10 or P10+1 adaptively
for an initial value. This condition works only when P10 >=
3.
p2[2 Weight L*](L), p3[3 Weight a*](a), p4[4 Weight b*](b):
the ratio of weights of L* : a* : b*
[2 Weight L* ]=integer -> Weight
of L* increases in proportion to this value.
[3 Weight a* ]=integer -> Weight
of a* increases in proportion to this value.
[4 Weight b* ]=integer -> Weight
of b* increases in proportion to this value.
*This plugin will be executed at a
rate proportional to these three values.
p5[5 Weighting function for color](MM): the ratio of Weight
of color to length.
[5 Weighting function for color]=integer
->Weight of color increases in inverse proportion to this value.
*When p5 becomes small, a noise increases
and contours of segments become not clear.
p6[6 K1](K1): the weight of texture. This value is always0
.
[6 K1] =integer -> Weight of texture
increases in proportion to this value.
*This function is removed temporally.
p7[7 Threshold](thresh): When a color difference becomes smaller
than this value, this process stops.
[7 threshold]=integer ->The number
of segments decrease in inverse proportion to this value.
* When this value is big, process finishes
for short time but fidelity decreases.
p8[8 DirectionX](Dx), p9[9 DirectionY](Dy): a length and
a width of area where this process executes at a time.
[8 DirectionX]=integer -> Length
becomes large in inverse proportion to this value.
[9 DirectionY]=integer -> Width becomes
large in inverse proportion to this value.
* When these value large, process time
becomes long and a difference of area between segments becomes large.
p10[10 Divided Segments Number](divide): An initial number
of segments set in the area decided above parameters: p8
and p9.
[10 Divided Segments Number]=integer
-> A number of segments increase in proportion to this value
* When 1 Segment Number=1,
this value must be greater than or equal to 3.
|
